Product Description
Enjoy fresh-tasting drinking water and ice with the EveryDrop EDRARXD1 Filter A refrigerator water filter.
The EDRARXD1 is designed for select refrigerators that use EveryDrop Filter A. It provides multi-stage filtration to help reduce unwanted contaminants while improving the taste and odor of refrigerator water.
This filter is rated for up to 200 gallons or approximately 6 months of use, whichever comes first. The convenient twist-and-lock installation makes straightforward without requiring special tools.
The EDRARXD1 is approximately 9.65 inches long, 3.35 inches wide and 2.75 inches deep, with one filter included per package.
Key Features
-
Filter Model: EDRARXD1
-
Filter Name: EveryDrop Filter A
-
Brand: EveryDrop
-
Product Type: Refrigerator water and ice filter
-
Package Quantity: 1 filter
-
Filter Life: Up to 200 gallons
-
Interval: Approximately 6 months
-
Filtration: Multi-stage filtration
-
Certifications: NSF/ANSI 42, 53 & 401
-
Dimensions: 9.65" L × 3.35" W × 2.75" D
-
UPC: 883049625980
-
Installation: Push-in and twist-to-lock design
-
Application: Refrigerator drinking water and ice
Filtration Performance
The EveryDrop EDRARXD1 is certified to:
- NSF/ANSI Standard 42
- NSF/ANSI Standard 53
- NSF/ANSI Standard 401
The listed contaminants reduced include:
- Asbestos
- Chlorine taste and odor
- Cysts
- Lead
- Mercury
- Microplastics
- Particulates
- Sand
- Sediment
- Silt
- Turbidity
- VOCs
These claims apply to the certified product and applicable testing conditions.
200-Gallon / 6-Month Filter Life
The EDRARXD1 is rated for up to 200 gallons of water or approximately 6 months, whichever comes first.
Actual filter life can vary depending on household water consumption and incoming water quality. For best performance, replace the filter when the recommended service interval is reached or when your refrigerator's filter indicator signals.
Compatible Filter Identification
The primary identification number for this product is:
- EDRARXD1
- EveryDrop Filter A
- Filter A
When replacing your refrigerator filter, always compare the number printed on your existing cartridge or verify compatibility using the complete refrigerator model number.
Product Specifications
| Specification |
Details |
| Brand |
EveryDrop |
| Model |
EDRARXD1 |
| Filter Type |
Filter A |
| Product Type |
Refrigerator Water & Ice Filter |
| Package Quantity |
1 |
| Filter Life |
200 gallons |
| Interval |
6 months |
| Length |
9.65 inches |
| Width |
3.35 inches |
| Depth |
2.75 inches |
| Certifications |
NSF/ANSI 42, 53 & 401 |
| UPC |
883049625980 |
| Installation |
Push-in / twist-to-lock |
All specifications above are taken from the currently available product listing.
How to Install the EDRARXD1
- Push the tab on the filter cover to lower the filter door.
- Hold the existing filter in place.
- Turn the old filter counterclockwise.
- Pull the old filter out and discard it.
- Clean any water that may have leaked during removal.
- Align the raised section of the new EDRARXD1 with the opening in the refrigerator filter receiver.
- Push the new filter into the housing until it is fully seated.
- Hold the filter in place and turn the bottom dial clockwise to lock it.
- Make sure the lock symbol and dial are properly aligned.
- Push the filter cover back into position.
- Flush water through the system and discard the first few gallons to remove carbon fines from the new filter.
- Reset the refrigerator filter indicator if required.
Resetting the Filter Indicator
After installation, reset the refrigerator's filter indicator according to the refrigerator manufacturer's instructions.
The source installation instructions specify holding the reset button for approximately 3 seconds to reset the filter light. The exact reset procedure can vary by refrigerator model.
When Should You Replace the EDRARXD1?
Replace the EDRARXD1 approximately every 6 months or 200 gallons, whichever comes first.
Replace it sooner if you notice:
- Reduced water flow
- Changes in water taste
- Changes in water odor
- Increased sediment
- Reduced ice-maker performance
- A refrigerator filter indicator showing that is needed
What's Included?
- 1 × EveryDrop EDRARXD1 Filter A refrigerator water filter
Important Compatibility Note
EDRARXD1 is specifically identified as EveryDrop Filter A.
Do not assume that every Whirlpool-family refrigerator uses the same EveryDrop filter. Different refrigerator models can require different filter numbers.
Before ordering, customers should verify:
Existing filter number: EDRARXD1 / Filter A
OR
Complete refrigerator model number
This compatibility check helps prevent ordering the wrong refrigerator water filter.
FAQ
What is EveryDrop EDRARXD1?
EDRARXD1 is the model number for EveryDrop Filter A, a refrigerator water and ice filter for compatible refrigerator systems.
How long does the EDRARXD1 filter last?
The EDRARXD1 is rated for up to 200 gallons or 6 months, whichever comes first.
What does EDRARXD1 reduce?
The listed reductions include chlorine taste and odor, lead, mercury, asbestos, cysts, microplastics, particulates, sand, sediment, silt, turbidity and VOCs.
Is EDRARXD1 NSF certified?
Yes. The product listing identifies the filter as certified to NSF/ANSI Standards 42, 53 and 401.
How many filters are included?
One EDRARXD1 Filter A cartridge is included per package.
What are the dimensions of EDRARXD1?
The listed dimensions are approximately 9.65" × 3.35" × 2.75".